Your shopping cart is empty.
Product Description
This is a NEW drive motor used on several brands of skidloaders including John Deere, Mustang,and Owattona. This is the correct drive motor for the following machines:
Owattona / Mustang model 330 up to serial number 6598
Owattona / Mustang model 440 all serial numbers
John Deere model 70 up to serial number 001660
It replaces Owatonna / Mustang part numbers 250-32292, 250-32358, and 250-31014.
It replaces John Deere part numbers GG250-32292 and GG250-32358.
This motor has #12 O-ring boss ports for the drive hoses and a #6 O-ring boss case drain hole. This motor has a 3/8-16 bolt hole in the end of the shaft to hold the sprocket in place. This picture has a rubber boot over the 1 inch,15 spline shaft so it looks different.
*Since drive motors are installed new by the OEM in pairs. Loader Parts Source, Inc. always recommends changing both drive motors as they have been exposed to the same wear and tear. This could save future down time and expense.*
Owattona / Mustang model 330 up to serial number 6598
Owattona / Mustang model 440 all serial numbers
John Deere model 70 up to serial number 001660
It replaces Owatonna / Mustang part numbers 250-32292, 250-32358, and 250-31014.
It replaces John Deere part numbers GG250-32292 and GG250-32358.
This motor has #12 O-ring boss ports for the drive hoses and a #6 O-ring boss case drain hole. This motor has a 3/8-16 bolt hole in the end of the shaft to hold the sprocket in place. This picture has a rubber boot over the 1 inch,15 spline shaft so it looks different.
*Since drive motors are installed new by the OEM in pairs. Loader Parts Source, Inc. always recommends changing both drive motors as they have been exposed to the same wear and tear. This could save future down time and expense.*