This shaft is used in the Scat Trak model 1300D and 1300C late model and the Volvo MC60 skidloader hydraulic drive motor. When this machine is used extensively in an application were there is load on only the front or rear axle at high speed (such as manure scraping) there is a problem of these bearings going out. Since the preload is not adjustable, the assembly needs to be replaced. These are new shafts with new bearings installed to the correct preload in the factory. The output end is 1 1/2" 17 spline. The Scat Trak part number 8032247 changes to a Volvo part number 11710594. We also include the seals needed to install this shaft.

We can install this shaft into your motor for an additional 200 dollars if you ship it to us at your cost.